Skip to main content

Accurate Magnetic Field Measurement Method Could Advance Quantum Sensing




 

Optically pumped magnetometers (OPMs) are used to measure magnetic fields in biosensing, contraband testing, and magnetic communications. They also aid in dark matter searches and serve as promising platforms for quantum-enhanced measurements.

Accurate vector magnetometry, however, remains a challenge for OPMs due to the OPM’s inherent scalar operation. Scalar OPMs require an external reference to extract directional information. While scalar measurements are often sufficient, robust calibration of vector OPMs is increasingly important for applications requiring high accuracy as well as precision.

Researchers at JILA, a joint research institute of the University of Colorado Boulder and the National Institute of Standards and Technology, demonstrated a vector OPM that uses Rabi oscillations driven between the manifolds of rubidium atoms to measure the direction of a magnetic field against the polarization ellipse structure of a microwave field.

The researchers exposed a cell containing roughly one hundred billion rubidium atoms, in vapor form, to a microwave signal. They hit the chamber with a magnetic field, which caused the atoms inside the chamber to shift. Using a laser, the researchers measured the shift in the atomic energy.

“Atoms can tell you a lot,” professor Cindy Regal said. “We’re data mining them to glean simultaneously whether magnetic fields are changing by extremely small amounts and what direction those fields point.”

Regal said that if an atom is hit with a microwave signal, its internal structure will “wiggle.” This “atomic dance” can tell physicists a lot.

“Ultimately, we can read out those wiggles, which tell us about the strength of the energy transitions the atoms are undergoing, which then tells us about the direction of the magnetic field,” Regal said.

In the current study, the team observed the shifts in the atomic energy — the atomic “dancing” — to pinpoint the orientation of a magnetic field to an accuracy of nearly one-hundredth of a degree.

By relying only on atomic measurements, the researchers were able to detect drift in the microwave vector reference and compensate for systematic shifts. To enable deadzone-free operation, the researchers introduced a Rabi measurement that used dressed-state resonances.

These measurements, performed within the vapor cell platform, achieved an average vector accuracy of 0.46 milliradians and vector sensitivities down to 11 micro-radians per square root hertz, for geomagnetic field strengths near 50 micro-teslas. This performance surpassed the accuracy threshold of several existing OPM methods that use atomic vapors with an electromagnetic vector reference.

“You can think of each atom as a compass needle, and we have a billion compass needles, which could make for really precise measurement devices,” researcher Dawson Hewatt said.

In the future, the findings could be used to build quantum sensors to map brain activity, for example, or help airplanes navigate.

“What magnetic imaging allows us to do is measure sources that are buried in dense and optically opaque structures,” professor Svenja Knappe said. “They’re underwater. They’re buried under concrete. They’re inside your head, behind your skull.”

Unlike mechanical devices with internal parts that can change over time, atoms are always the same, Regal said.

The team plans to further improve the precision of its vector OPM before introducing it for practical use. The researchers hope that one day airplane pilots can use the vector OPM based on atomic vapors to navigate the plane by following local changes in Earth’s magnetic field, much like migratory birds use their innate biological magnetic sensors.

“It’s now a question of how far can we push these atomic systems,” Knappe said.


Bio Photonics Research Award

Visit: biophotonicsresearch.com
Nominate Now: https://biophotonicsresearch.com/award-nomination/?ecategory=Awards&rcategory=Awardee

#MeatAnalysis #FluorescenceTech #FoodQuality #FoodSafety #SpectroscopyInFood #MeatAuthentication #RapidDetection #FoodScience #MeatFreshness #MolecularDetection #FoodIndustryInnovation #NonDestructiveTesting #FoodMonitoring #SpectroscopyApplications #QualityControl #AdvancedSpectroscopy #MeatSpoilageDetection #FoodIntegrity #SmartFoodTesting #RealTimeAnalysis #FoodAuthenticity #FoodSafetyInnovation #SpectroscopyResearch #NextGenFoodSafety #InnovativeFoodScience,

Comments

Popular posts from this blog

Abrisa Technologies Acquires Agama Glass Technologies

SANTA PAULA, Calif. — Abrisa Technologies, a provider of custom glass optics and thin film coatings and a subsidiary of HEF Photonics, has acquired Agama Glass Technologies, a manufacturer of etched anti-glare glass and technical glass processing. The acquisition, Abrisa said, expands its manufacturing footprint and adds a vertically integrated solution for chemically etched anti-glare display glass. According to Abrisa, Clarksburg, West Virginia-based Agama operates North America’s only high-volume technical glass etching facility. Agama's flagship product, AgamaEtch, is used in high-performance display and optics applications. The company's 85,000 sq ft facility also offers precision glass fabrication, chemical strengthening, and silk-screen printing, serving markets such as avionics, defense, medical, industrial, and touchscreen displays. Combined with Abrisa Technologies’ and HEF Photonics’ thin-film coating and surface engineering capabilities, Agama's offerings wi...

How Biophotonics Is Harnessing Light for Health And Science

Fifty or so years ago French physicist Pierre Aigrain coined the term photonics as a research field whose goal was to use light to perform functions that traditionally fell within the typical domain of electronics, such as telecommunications, and information processing. Or maybe it was John Campbell who, in a letter sent to Gotthard Gunther in 1954, wrote, “Incidentally, I’ve decided to invent a new science — photonics. It bears the same relationship to Optics that electronics does to electrical engineering. Photonics, like electronics, will deal with the individual units; optics and EE deal with the group phenomena! And note that you can do things with electronics that are impossible in electrical engineering!” Naming rights aside, the field of photonics began in earnest between 1958 and 1960 with the invention of the maser and the laser. The laser diode followed during the 1970s, optical fibers and the erbium-doped fiber amplifier after that, and, pretty soon, the telecommunications...

Laser Method Enables Fast & Precise Blood Vessels in Hydrogel

Researchers from Vienna University of Technology (TU Wien) and Keio University have found a way to create artificial blood vessels in miniature organ models in a quick and reproducible manner. The method utilizes ultrashort laser pulses in the femtosecond range to write highly 3D structures into a hydrogel. In biomedical research, organs-on-a-chip are becoming increasingly important: By cultivating tissue structures in precisely controlled microfluidic chips, it is possible to conduct research much more accurately than in experiments involving living humans or animals. However, there has been a major obstacle: such mini-organs are incomplete without blood vessels. To facilitate systematic studies and ensure meaningful comparisons with living organisms, a network of perfusable blood vessels and capillaries must be created — in a way that is precisely controllable and reproducible. “We can create channels spaced only a hundred micrometers apart. That’s essential when you would like to...