Skip to main content

Photodynamic Method Boosts Antibiotics Against Drug-Resistant Bacteria




 


Multidrug-resistant bacteria are considered a serious threat to infection control. Faced with the increasing difficulty of developing new antibiotics to combat resilient bacterial strains, scientists are turning to photodynamic inactivation (PDI), a light-based approach to breaking antimicrobial resistance.

PDI strengthens the effect of antibiotics and induces oxidative stress in microorganisms through the interaction of light with a photosensitizer. The photosensitizer is energized in PDI by absorbing visible light to form reactive oxygen species that trigger bacterial inactivation by oxidizing and destroying microorganisms or weakening their resistance to antibiotics.

In recent work, researchers at the University of São Paulo’s Optics and Photonics Research Center showed that PDI can modify bacterial sensitivity to antibiotics and reduce the resistance and persistence of both standard and clinical strains. The researchers, led by professor Vanderlei Salvador Bagnato, investigated the effects of photodynamic action on resistant bacteria collected from patients and bacterial cells with laboratory-induced resistance. They focused their investigation on Staphylococcus aureus, a bacterium that causes a range of diseases, from skin infections to pneumonia.

The researchers used 10 μM, 10 J/cm2 of the photosensitizer curcumin at 450 nm with antibiotics. Curcumin has been shown to strengthen some antibiotics by affecting the bacterial membrane and other cellular components. Three antibiotics — amoxicillin, erythromycin, and gentamicin — were treated with curcumin.

The results showed that five cycles of PDI were sufficient to break bacterial resistance. The researchers found that S. aureus was most susceptible to gentamicin, although the other two antibiotics also proved effective against the bacteria after treatment with PDI.

In addition, the researchers concluded that a reduction in the degree of antimicrobial resistance through photo-oxidative action can mitigate antibiotic failures. Photodynamic action not only improves infection control, but also modifies the degree to which antimicrobials are susceptible to bacteria by decreasing bacterial resistance to below breakpoints and controlling the biofilm formation, which is an important bacterial virulence factor.

“We discovered that PDI doesn’t always destroy the bacteria, but it does destroy part of the mechanisms they use to become drug-resistant,” Bagnato said. “This led to the idea of trying an oxidative shock to make them susceptible to antibiotics.”

Historically, the primary strategy in the fight against multidrug-resistant bacteria infections has been the development of new antimicrobial drugs. However, failures in antibiotic treatments occur. Antibiotics act on a certain bacterial cell compartment, depending on their type, while PDI acts in the entire bacterial cell, causing multiple damages.

The researchers said that an increase or a complete recovery of a bacterium’s susceptibility to antibiotics could be a way to prolong the useful life of recent classes of antibiotics, which is essential to avoid infection control collapses. They said that a broader assessment of other antibiotics, microorganisms, and photosensitizers is needed to achieve a full understanding of the mechanisms of action and interaction between PDI and antibiotics.

Bio Photonics Research Award

Visit: biophotonicsresearch.com
Nominate Now: https://biophotonicsresearch.com/award-nomination/?ecategory=Awards&rcategory=Awardee

#MeatAnalysis #FluorescenceTech #FoodQuality #FoodSafety #SpectroscopyInFood #MeatAuthentication #RapidDetection #FoodScience #MeatFreshness #MolecularDetection #FoodIndustryInnovation #NonDestructiveTesting #FoodMonitoring #SpectroscopyApplications #QualityControl #AdvancedSpectroscopy #MeatSpoilageDetection #FoodIntegrity #SmartFoodTesting #RealTimeAnalysis #FoodAuthenticity #FoodSafetyInnovation #SpectroscopyResearch #NextGenFoodSafety #InnovativeFoodScience,

Comments

Popular posts from this blog

Abrisa Technologies Acquires Agama Glass Technologies

SANTA PAULA, Calif. — Abrisa Technologies, a provider of custom glass optics and thin film coatings and a subsidiary of HEF Photonics, has acquired Agama Glass Technologies, a manufacturer of etched anti-glare glass and technical glass processing. The acquisition, Abrisa said, expands its manufacturing footprint and adds a vertically integrated solution for chemically etched anti-glare display glass. According to Abrisa, Clarksburg, West Virginia-based Agama operates North America’s only high-volume technical glass etching facility. Agama's flagship product, AgamaEtch, is used in high-performance display and optics applications. The company's 85,000 sq ft facility also offers precision glass fabrication, chemical strengthening, and silk-screen printing, serving markets such as avionics, defense, medical, industrial, and touchscreen displays. Combined with Abrisa Technologies’ and HEF Photonics’ thin-film coating and surface engineering capabilities, Agama's offerings wi...

How Biophotonics Is Harnessing Light for Health And Science

Fifty or so years ago French physicist Pierre Aigrain coined the term photonics as a research field whose goal was to use light to perform functions that traditionally fell within the typical domain of electronics, such as telecommunications, and information processing. Or maybe it was John Campbell who, in a letter sent to Gotthard Gunther in 1954, wrote, “Incidentally, I’ve decided to invent a new science — photonics. It bears the same relationship to Optics that electronics does to electrical engineering. Photonics, like electronics, will deal with the individual units; optics and EE deal with the group phenomena! And note that you can do things with electronics that are impossible in electrical engineering!” Naming rights aside, the field of photonics began in earnest between 1958 and 1960 with the invention of the maser and the laser. The laser diode followed during the 1970s, optical fibers and the erbium-doped fiber amplifier after that, and, pretty soon, the telecommunications...

Glow Up: Synthesizing Cr³⁺-Doped Phosphors!

 Glow Up: Synthesizing Cr³⁺-Doped Phosphors! Introduction : Phosphor technology is lighting the way to incredible applications in areas like biological imaging, food safety detection, and even next-generation energy solutions. One promising development involves Cr³⁺-doped Na-β"-Al₂O₃ phosphors, synthesized using a high-temperature solid-state method. In this post, we'll break down the fascinating science behind these unique materials and their exceptional thermal and luminescent properties. Understanding Cr³⁺-Doped Na-β"-Al₂O₃ Phosphors Synthesis of Na-β"-Al₂O₃ phosphors is a process that infuses Cr³⁺ ions within the material's lattice structure. Here, chromium ions enter the lattice in a trivalent state, taking up space within the Al³⁺ sites of the crystal. This occupancy isn't random; it’s carefully controlled to ensure that Cr³⁺ ions occupy specific positions within the matrix. This precise arrangement is crucial for regulating the material's luminesce...