Skip to main content

Quantum Sensor Generates Own Light Source to Detect Biomolecules






The development of a compact, self-illuminating plasmonic sensor could make high-performing optical biosensors more accessible for rapid diagnostics and environmental monitoring and in point-of-care settings. The plasmonic biosensor can focus light waves down to a scale small enough to detect proteins and amino acids, without needing a bulky, expensive external light source.

By exploiting a quantum phenomenon called inelastic electron tunneling, researchers at the École Polytechnique Fédérale de Lausanne (EPFL), aided by colleagues at ETH Zurich, ICFO, and Yonsei University, created a biosensor that requires only a steady flow of electrons, in the form of an applied electrical voltage, to illuminate and detect molecules.

As an electron passes through a multilayer (metal-insulator-metal) film in the sensor structure, it transfers some of its energy to a plasmon, which then emits a photon. The intensity and spectrum of the light changes in response to contact with a biomolecule.

“If you think of an electron as a wave, rather than a particle, that wave has a certain low probability of ‘tunneling’ to the other side of an extremely thin insulating barrier while emitting a photon of light,” researcher Mikhail Masharin said. “What we have done is create a nanostructure that both forms part of this insulating barrier and increases the probability that light emission will take place.”

The multilayer structure has an aluminum electrode as the bottom layer, with a thin isolating layer of alumina, formed by thermal oxidation of the film, acting as a tunneling barrier. The upper electrode consists of a doubly periodic metasurface made of resonant gold nanowire antennas.

The plasmonic metasurface serves a dual purpose. It both creates the conditions for quantum tunneling and controls the resulting light emission, simultaneously providing enhanced electron-to-light conversion and far-field light emission. This dual capability is due to the arrangement of the gold nanowires, which act as nanoantennas to concentrate the light at the nm volumes required to detect biomolecules efficiently.

The optically resonant, doubly periodic nanowire metasurface provides uniform emission over large areas, amplified by the nanoantennas that simultaneously enhance the spectral and refractive index sensitivity.

“Inelastic electron tunneling is a very low-probability process, but if you have a low-probability process occurring uniformly over a very large area, you can still collect enough photons,” researcher Jihye Lee said. “This is where we have focused our optimization, and it turns out to be a very promising new strategy for biosensing.”

The researchers tested the biosensor with various analytes including thin layers of polymer and biomolecules. They observed that both the intensity and the spectral profile of the emitted light were modulated by the local refractive index changes produced by the presence of the analyte.

“Tests showed that our self-illuminating biosensor can detect amino acids and polymers at picogram concentrations — that’s one-trillionth of a gram — rivaling the most advanced sensors available today,” researcher Hatice Altug said.

The biosensor provides an integrated, nanoscale light source without requiring any labels. With plasmonic antennas serving both as a sensing element and a light source, the sensor has a considerably smaller device footprint compared with designs involving the integration of plasmonic structures on top of LEDs or photodetectors.

In addition to being compact and sensitive, the quantum platform is scalable and compatible with sensor manufacturing methods. Less than one square millimeter of active area is required for sensing, demonstrating the potential for its use in handheld biosensors. Because it removes the need for an external light source, the on-chip, optical biosensor could be appropriate for various point-of-care applications.

“Our work delivers a fully integrated sensor that combines light generation and detection on a single chip,” researcher Ivan Sinev said. “With potential applications ranging from point-of-care diagnostics to detecting environmental contaminants, this technology represents a new frontier in high-performance sensing systems.”

Bio Photonics Research Award


Visit: biophotonicsresearch.com
Nominate Now: https://biophotonicsresearch.com/award-nomination/?ecategory=Awards&rcategory=Awardee

#MeatAnalysis #FluorescenceTech #FoodQuality #FoodSafety #SpectroscopyInFood #MeatAuthentication #RapidDetection #FoodScience #MeatFreshness #MolecularDetection #FoodIndustryInnovation #NonDestructiveTesting #FoodMonitoring #SpectroscopyApplications #QualityControl #AdvancedSpectroscopy #MeatSpoilageDetection #FoodIntegrity #SmartFoodTesting #RealTimeAnalysis #FoodAuthenticity #FoodSafetyInnovation #SpectroscopyResearch #NextGenFoodSafety #InnovativeFoodScience,

Comments

Popular posts from this blog

Abrisa Technologies Acquires Agama Glass Technologies

SANTA PAULA, Calif. — Abrisa Technologies, a provider of custom glass optics and thin film coatings and a subsidiary of HEF Photonics, has acquired Agama Glass Technologies, a manufacturer of etched anti-glare glass and technical glass processing. The acquisition, Abrisa said, expands its manufacturing footprint and adds a vertically integrated solution for chemically etched anti-glare display glass. According to Abrisa, Clarksburg, West Virginia-based Agama operates North America’s only high-volume technical glass etching facility. Agama's flagship product, AgamaEtch, is used in high-performance display and optics applications. The company's 85,000 sq ft facility also offers precision glass fabrication, chemical strengthening, and silk-screen printing, serving markets such as avionics, defense, medical, industrial, and touchscreen displays. Combined with Abrisa Technologies’ and HEF Photonics’ thin-film coating and surface engineering capabilities, Agama's offerings wi...

How Biophotonics Is Harnessing Light for Health And Science

Fifty or so years ago French physicist Pierre Aigrain coined the term photonics as a research field whose goal was to use light to perform functions that traditionally fell within the typical domain of electronics, such as telecommunications, and information processing. Or maybe it was John Campbell who, in a letter sent to Gotthard Gunther in 1954, wrote, “Incidentally, I’ve decided to invent a new science — photonics. It bears the same relationship to Optics that electronics does to electrical engineering. Photonics, like electronics, will deal with the individual units; optics and EE deal with the group phenomena! And note that you can do things with electronics that are impossible in electrical engineering!” Naming rights aside, the field of photonics began in earnest between 1958 and 1960 with the invention of the maser and the laser. The laser diode followed during the 1970s, optical fibers and the erbium-doped fiber amplifier after that, and, pretty soon, the telecommunications...

Accurate Magnetic Field Measurement Method Could Advance Quantum Sensing

  Optically pumped magnetometers (OPMs) are used to measure magnetic fields in biosensing, contraband testing, and magnetic communications. They also aid in dark matter searches and serve as promising platforms for quantum -enhanced measurements. Accurate vector magnetometry, however, remains a challenge for OPMs due to the OPM’s inherent scalar operation. Scalar OPMs require an external reference to extract directional information. While scalar measurements are often sufficient, robust calibration of vector OPMs is increasingly important for applications requiring high accuracy as well as precision. Researchers at JILA, a joint research institute of the University of Colorado Boulder and the National Institute of Standards and Technology, demonstrated a vector OPM that uses Rabi oscillations driven between the manifolds of rubidium atoms to measure the direction of a magnetic field against the polarization ellipse structure of a microwave field. The researchers exposed a cell con...