Skip to main content

Light-Activated Biomimetic Gel Offers Potential for Corneal Repair






Tens of millions of people around the world suffer from corneal diseases, with only a small fraction eligible for corneal transplantation. In a recent study, researchers at the University of Ottawa showed that biomimetic materials activated with low-energy blue light can reshape and thicken damaged corneal tissue to promote healing and recovery. The research results could provide a safe way to treat corneal thinning, as well as a practical alternative to corneal transplantation.

Further, the dosage of pulsed blue light needed to activate the biomaterial is minimal, which mitigates the possibility of cytotoxic effects from the light.

The biomaterial is injected within the corneal tissue after a tiny pocket is surgically created. The injectable biomaterial, which is in the form of a viscous liquid, is made from short peptides and glycosaminoglycans that assemble into a hydrogel when irradiated with low-energy blue light. The hydrogel hardens and forms a tissue-like 3D structure with properties similar to those found in pig corneas. The use of low-energy pulsed light irradiation allows the researchers to safely use photocuring to photo-crosslink the biomimetic materials designed for injection into thinning corneas.

Data showed that the materials used to obtain experimental test results could remain in an animal model for several weeks. As a result, professor Emilio Alarcon and the other researchers anticipate that the material will remain stable and be nontoxic in human corneas.

In their study, the researchers observed that the way the light was delivered affected the formation of the hydrogel. Pulsed irradiation allowed for better recovery of the oxygen levels within the hydrogel, compared to a continuous dosage of light. Pulsing the light for 2.5 s on, 2.5 s off produced optimal results.

To keep the light dosage under standard safety values, the researchers selected a low in vivo radiance dosage of 8.5 mW cm−2 for 10 min of pulsed light, which is equivalent to only 5 min of light exposure. This radiance level is below the category of low risk when direct blue light is exposed to the eye for up to 166 min. The researchers performed in vivo experiments for light toxicity on animal models to verify the safety of their light irradiation regime.

In vivo experiments using a rat model indicated that the light-activated hydrogel could thicken corneas without side effects. The researchers also successfully tested the technology in an ex vivo pig cornea model.

According to Alarcon, the researchers developed the technology to be clinically translatable; all components must be designed to be manufacturable following strict standards for sterility. In clinical conditions, reducing the amount of light delivered to the eye will translate into a faster and safer procedure. It will shorten the period during which eye movement must be minimized to ensure stability of the injected biomaterial volume and shape until it turns into a soft hydrogel. Good control of the corneal front surface curvature is of primary importance for adequate refraction of the light within the eye.

Although testing in large animal models will be necessary prior to clinical human trials, the researchers have begun the patent application process for the technology.

Bio Photonics Research Award

Visit: biophotonicsresearch.com
Nominate Now: https://biophotonicsresearch.com/award-nomination/?ecategory=Awards&rcategory=Awardee

#MeatAnalysis #FluorescenceTech #FoodQuality #FoodSafety #SpectroscopyInFood #MeatAuthentication #RapidDetection #FoodScience #MeatFreshness #MolecularDetection #FoodIndustryInnovation #NonDestructiveTesting #FoodMonitoring #SpectroscopyApplications #QualityControl #AdvancedSpectroscopy #MeatSpoilageDetection #FoodIntegrity #SmartFoodTesting #RealTimeAnalysis #FoodAuthenticity #FoodSafetyInnovation #SpectroscopyResearch #NextGenFoodSafety #InnovativeFoodScience,

Comments

Post a Comment

Popular posts from this blog

Abrisa Technologies Acquires Agama Glass Technologies

SANTA PAULA, Calif. — Abrisa Technologies, a provider of custom glass optics and thin film coatings and a subsidiary of HEF Photonics, has acquired Agama Glass Technologies, a manufacturer of etched anti-glare glass and technical glass processing. The acquisition, Abrisa said, expands its manufacturing footprint and adds a vertically integrated solution for chemically etched anti-glare display glass. According to Abrisa, Clarksburg, West Virginia-based Agama operates North America’s only high-volume technical glass etching facility. Agama's flagship product, AgamaEtch, is used in high-performance display and optics applications. The company's 85,000 sq ft facility also offers precision glass fabrication, chemical strengthening, and silk-screen printing, serving markets such as avionics, defense, medical, industrial, and touchscreen displays. Combined with Abrisa Technologies’ and HEF Photonics’ thin-film coating and surface engineering capabilities, Agama's offerings wi...
Post a Comment
Read more

How Biophotonics Is Harnessing Light for Health And Science

Fifty or so years ago French physicist Pierre Aigrain coined the term photonics as a research field whose goal was to use light to perform functions that traditionally fell within the typical domain of electronics, such as telecommunications, and information processing. Or maybe it was John Campbell who, in a letter sent to Gotthard Gunther in 1954, wrote, “Incidentally, I’ve decided to invent a new science — photonics. It bears the same relationship to Optics that electronics does to electrical engineering. Photonics, like electronics, will deal with the individual units; optics and EE deal with the group phenomena! And note that you can do things with electronics that are impossible in electrical engineering!” Naming rights aside, the field of photonics began in earnest between 1958 and 1960 with the invention of the maser and the laser. The laser diode followed during the 1970s, optical fibers and the erbium-doped fiber amplifier after that, and, pretty soon, the telecommunications...
Post a Comment
Read more

Accurate Magnetic Field Measurement Method Could Advance Quantum Sensing

  Optically pumped magnetometers (OPMs) are used to measure magnetic fields in biosensing, contraband testing, and magnetic communications. They also aid in dark matter searches and serve as promising platforms for quantum -enhanced measurements. Accurate vector magnetometry, however, remains a challenge for OPMs due to the OPM’s inherent scalar operation. Scalar OPMs require an external reference to extract directional information. While scalar measurements are often sufficient, robust calibration of vector OPMs is increasingly important for applications requiring high accuracy as well as precision. Researchers at JILA, a joint research institute of the University of Colorado Boulder and the National Institute of Standards and Technology, demonstrated a vector OPM that uses Rabi oscillations driven between the manifolds of rubidium atoms to measure the direction of a magnetic field against the polarization ellipse structure of a microwave field. The researchers exposed a cell con...
Post a Comment
Read more